A note of significant importance: only Scribit Original Plaster Markers are extensively tested for and guarantee the Scribit erasing function.
Erasing feature is not possible on glass and on whiteboard surfaces.
You can start the Erasing process via the Scribit App upon completion of a drawing:
1) Open the Scribit App;
2) Tap on the Scribit Icon at the bottom of the dashboard to open the Scribit Player;
3) Tap on the Erasing Icon at the bottom right of the screen;
4) Scribit will then start erasing the drawing.
Scribit can erase any design (images, text, selfies) ONLY upon its completion. You can close the app, still after opening it again, you will be able to erase the last drawing performed. If you turn off Scribit, it will forget the last drawing and it will not be able to initiate the erasing process. Erasing can be done remotely - even if you are not in proximity to the drawing surface.
Please be aware that if you place your Scribit somewhere else or you send another drawing to it, the robot won’t be able to erase all the previous drawings, but just the very last one.
DO NOT touch Scribit while it is erasing: during the process Scribit will reach and exceed the temperature of 60°C/140°F.
Successful erasing is closely related to a strict and correct Scribit installation. If your first drawing doesn’t get a proper erasing, don’t be alarmed - this is often related to a non accurate first Scribit installation. With your future drawings erasing will be a lot more efficient as Scribit would know more about its zero position.
Since erasing is based on high temperature, please have in mind that successful erasing is dependent on your environment temperature. Your optimal indoor temperature for the process should be in the range 21°C-25°C (70°F-77°F). Should the room temperature is lower than 20°C (70°F) the erasing is anticipated to be less effective - some parts of your drawing would often need a finalizing manual erasing.
A damp cloth will erase the drawing from your wall even faster, but please be aware that this could damage the wall if the wall paint is not washable.
The magic about Scribit Original Plaster Marker is related to their thermosensitive ink.
That is why you should never allow exposure of your Scribit markers to extreme temperatures (-10°C; +50°C). In particular, never leave them on the direct sunlight or inside Scribit during the erasing process.